 |
|
|
|
|
Insulation Systems: Estimate / Pricing Foam Insulation |
|
| The NCFI 2020 PLUS Residential Insulation System: | ||
|
|
|
| Adds structural strength Ideal for numerous commercial and industrial applications - block, cavity walls, hollow core, pre cast panels, common walls, window and door frames |
 |
|
|
BRI offers a variety of foams for residential, commercial, and
institutional building Insulation Systems. With an R-value
of 6.7 to 7.14 per inch and with polyurethane foam's ability
to air-seal your home or building, we can provide you with
an insulation system that economically suits your needs. NCFI
Spray System 362-91 is a 2.0 lb/cu ft density, closed-cell
foam. Our trained applicators apply it as a liquid to the
masonry block wall. The foam reacts, expands, and cures in-place,
forming a seamless insulating and damp proofing membrane.
It is a light weight cellular plastic material
that is foamed-in-place enabling it to fill any cavity, regardless
of size or shape. The foam flows into odd-shaped spaces, around
wires, pipes, and other obstructions. It is a highly effective
thermal and acoustical barrier due to its cellular composition,
high "R" value, ease of application and versatility. A Polyurethane Foam Insulation System is a spray
applied cellular plastic that forms a continuous, monolithic
insulation and air barrier on walls, around corners, and on
contoured surfaces. Sprayed in place rigid foam adheres tenaciously
to most surfaces, forming a seamless permanent insulating
system even around the most difficult shapes. This product
can be used on the outside of buildings or in the stud walls
of houses, new or retrofit construction. Polyurethane foam exceeds the requirements of a
Type III air-barrier as proposed by the NRCC. The Department
of Energy (DOE) has documented that more than 40% of energy
loss in residential construction is due mainly to air leakage.
Polyurethane foam fills the cracks, gaps, and small openings
typically found in the building envelope, hence this conditioned
air loss would be eliminated. The high compressive strength of sprayed in place rigid foam contributes toward the structural integrity of stud wall construction, which significantly increases the racking strength of stud walls (metal or wood). Depending on the wall configuration, the usage of sprayed in place rigid foam can increase the racking strength of the wall by over 200 percent.
|
||
|
Bonner Roofing & Sheet Metal Company Florida's Premier Source for Superior Flat Commercial & Industrial Roofing Systems.
|
||
